3D Models: Box Vans
Click the images below to experience each interactive animated model.
Box Van Trailer
Shown loading from a bay.
- Tandem-Axle
- 13.6m long
- Straight-frame
- 4.2m high
- 385/65 R22.5 super single tyres
- Wide lath shutter
- 26 UK Pallet Capacity
Box Van Teardrop Trailer
Shown loading from a bay.
- Tandem-Axle
- 13.6m long
- Straight-frame
- 4.3m high
- 385/65 R22.5 super single tyres
- Wide lath shutter
- 26 UK Pallet Capacity
Box Van Fixed Double Deck Trailer
Shown unloading to ground level.
- Tri-Axle
- 13.6m long
- 4.88m high
- Step-frame
- 445/45 R19.5 mini single tyres
- Raise/lower suspension
- Two tier-tail-lift
- Swan-neck air-powered ramp
- Blade panels
- 52 UK Pallet capacity
Box Van Lifting Deck Trailer
Shown loading from a bay.
- Tri-Axle
- 13.6m long
- 4.88m high
- Step-frame
- 445/45 R19.5 mini single tyres
- Raise/lower suspension
- 3/4 length Lifting Deck platform
- Additional fixed 2nd deck over the swan-neck area
- Blade panels
- 52 UK Pallet capacity
Box Van Double Deck Trailer (Independent Suspension)
Shown loading from ground level.
These types of trailers do not have full axles and permit a much lower floor height and therefore a lower overall height. Load capacity is reduced on the lower deck where wheel arches are boxed in.
- Tri-Axle
- 13.6m long
- Step-frame
- 4.250m high
- 350mm rear deck height
- 385/65 R22.5 super single tyres
- Tridec independent suspension
- Boxed wheel arches
- Two tier-tail-lift
- 39 UK Pallet Capacity
Box Van Rigid Bodywork
Shown loading from a bay.
- 7.5T-26T GVW
- To suit any chassis marques
- Wide lath shutter
Box Van Rigid Teardrop
Shown loading from a bay.
- 7.5T-26T GVW
- To suit any chassis marques
- Wide lath shutter
- Column Tail-Lift
