This roller-operated net pulls down to form a cover across part of the rear aperture.
Commonly used on Lifting Deck applications, the net is captive to the rear frame and helps limit the risk of loose load falling from the second deck onto operatives during loading or unloading.
The roller spindle is fixed behind the rear header, positioning it out of the way of damage. The net is spring-loaded, allowing it to retract upwards into the roof space when not in use or when a greater rear aperture is required.
The net material allows visibility through the restraint so operators can identify if a load has collapsed before opening. This helps reduce the risk of unintentionally releasing a shifted or unstable load.
A full-width steel bar is housed within a pocket at the bottom of the net to maintain a straight, controlled edge. A pull strap is provided to one side, allowing the operator to draw the net down into position or guide it safely as it retracts.
The rear roller transverse load restraint net can be used in conjunction with any rear door type.
To enhance our content, some features in the Don-Bur library may include information from trusted third-party suppliers. We encourage operators to perform their own checks and seek additional technical advice before specifying, purchasing or installing any equipment. Don-Bur assumes no responsibility for the accuracy, completeness or timeliness of third-party information.
